Monday, December 23, 2019

How to Unclog Drains

Do you notice water backing up from the toilet or the sink? If you constantly hear gurgling sounds when using bathroom fixtures, it may be a sign that you have a drainage problem. Here are the best solutions you could try:

Pour in Some Bacteria
Whether it’s hair, grease or food, some sort of organic matter causes most drain clogs. Fortunately, there’s a type of bacteria that breaks down organic matter in your drains. Add the bacteria to your drains and it will consume organic matter which helps prevent clogs. You can buy drain-cleaning bacteria in granular or liquid form.

Bacterial drain cleaner is noncorrosive so it won’t harm pipes, and the bacteria won’t interfere with the bacteria in your septic system. Follow the instructions on the package. Add the bacteria when drains won’t be used, like right before everybody goes to bed, to allow it time to work. Drain and trap cleaner is available at home centers and hardware stores. A package should last several months, depending on how many drains you treat. Source: FamilyHandyman

Use a Hose or Power Washer
You may need more force to clear an especially stubborn main drain clog, and you should apply it through one of the drain cleanout fittings. You should have one or two of these in the basement and more outside. Open one of them by unscrewing the cap with a wrench and have a bucket handy to catch water. You’ll also want to wear protective clothing, goggles and gloves because the water may be under pressure and could spray when you open the cleanout.

If water does spill out, you’re on the right track because it means the clog is downstream of the fitting. Insert a hose with a high-pressure nozzle or preferably a power-washer wand with a 0° (red) or 15° (green) tip. Place the bucket under the cleanout, point the nozzle downstream, pull the trigger and stand back. Source: Hunker

Get Help from Professionals
Don’t run the water or flush the toilet! If you don’t add water to your drain system, you can’t make the problem worse (that is, if the clog is in your line and not the city’s main; see below). As an added precaution, you can shut off the main water supply to the house so that no one runs the water by accident. Tell everyone in the house not to use water, then call a plumber or drain specialist to have the drain cleared. These professionals have special equipment, including motorized augers, to quickly and effectively remove large clogs in the main sewer drains. Source: TheSpruce

Don’t wait for your drainage problem to get worse during the holiday season when everyone will be at home. Call us to book an appointment today!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/34X36ul

Thursday, December 19, 2019

4 Christmas Party Hosting Tips

Christmas is only a week away. If you still don’t have a solid plan on how to host that holiday party everyone is looking forward to, then here are some great tips to help you lighten the load.

4 Christmas Party Hosting Tips

Create food beforehand

If you’ve decided to host a cocktail party, put together a list of the appetizers you’d like to serve. We suggest using recipes that can be made in advance, which will save you time and energy on the day of the party.  Source: MarthaStewart

Set the mood with good music

Very little has the impact on a scene like the music selection, and mellow is the epitome of elegance. You want to create a setting for guests so that they spend their evening relaxed and comfortable, and the tempo of the music you choose will play a large part in that. But mind you, you don’t want them to get so comfortable that they fall asleep. A tasteful playlist for an elegant Christmas party could include a mix of traditional Christmas songs and some classic jazz thrown in to keep the tempo up. Source: Lifestyle.HowStuffWorks

Keep the food warm in the oven

“A 200-degree oven works as a warming drawer,” says Kelsey Nixon, the host of Kelsey’s Essentials, on the Cooking Channel. This also frees up counter space and provides insurance that your food won’t burn if you forget to take it out. Source: RealSimple

Delegate tasks

Share out tasks between the family to ensure a hassle-free evening. One person could be in charge of laying the table, whilst another takes care of drinks – allowing you to focus on food preparation. Be appreciative of everyone’s effort – encouragement and praise can go a long way! Source: GoodHousekeeping

Did you know that one of the things people notice most upon entering a home is the floor? Don’t let your carpet become the talk of the town due to its dinginess. Have it cleaned or repaired before your party. Call us today!

The post 4 Christmas Party Hosting Tips appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/38XCBb5

Wednesday, December 18, 2019

Safety Roofing Tips Every DIYer Should Know

Planning to repair the roof on your own to save some money? Here are useful tips you should remember before starting your weekend project.

 

Check the weather
Fussing to try and find a leak as soon as it happens is something that could put you in the hospital. Meddling on a roof while it’s raining or covered with ice and snow isn’t the ideal way to find a leak. Trying to temporarily fix a leak could be highly dangerous. If you want to do it right, there is no quick-fix. Just take your time, and be very patient and careful to wait for Mother Nature to give you the green light. Source: DIYNetwork

Get a gutter guard
One way to keep your ladder safe and steady and to keep your gutters protected as you’re up on the roof is to use a gutter-guard. The gutter-guard basically consists of any scrap piece of wood or plywood that you fasten to the roof deck, put a notch in it, lean the ladder legs against the notch and tie in place. You can also put some shingle bundles against the feet of the ladder to help keep it steady and make sure it doesn’t slide.

Create a toe hold
This tip is also particularly good if you’re working on a steeply pitched roof. In order to help keep your balance and prevent slippage, you can install your own temporary toe holds to help your feet keep their grip. Simply take several wood cleats measuring 2 by 4 inches (you can also use adjustable roof jacks for this) and nail them to the roof deck. When you’re done with your work, simply remove them. Source: DoItYourself

Find someone to help you
Let someone else know when you’ll be up on the roof – someone who will be with you at home that day, or else a neighbor who can keep an eye on you. In fact, it’s best if at least two people work together on even a minor roof job. Someone needs to be there to help or call for help in the case of an emergency. Source: YourAmazingPlaces

If you’re unsure how to handle roof repairs, it’s better to leave it to the professionals. Our roofing crew have the right safety gear to guarantee that no accidents will happen.  Book an appointment today!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/2M9keWR

Monday, December 9, 2019

Signs of a Bad Carpet Installation

When installing carpet on your floor, it’s best to let the professionals handle it. However, you still must choose the right contractor for the job because poor installation can result in the following problems:

Signs of a Bad Carpet Installation

Buckling or Rippling

When a wall-to-wall carpet is installed, it must be stretched tightly and then is secured in place with tack strips along the edges of the carpet. If the installer has not stretched the carpet tightly enough, it may loosen slightly, which could cause it to ripple. Ideally, carpet should be stretched during the installation using a power stretcher, which will reduce the chances of buckling.

If the carpet is being installed in an area in which the conditions are significantly different than where it was previously stored (for example, from an unheated warehouse to a heated home), then the carpet should be allowed to acclimate before installation. This should reduce the possibility of buckling. Source: TheSpruce

Loosening of Seams

Inspect the seams where the carpet meets the walls, baseboards, doorways or other types of flooring. If you see frayed or loose edges that aren’t neatly tucked under the walls, floorboards or transitional carpet strips, the carpet isn’t installed well. Carpet installers often secure edges with additional tacks, carpet tape, transition strips or adhesives to reduce the likelihood of carpet separating from the wall or unraveling at the corners. Contact the installer to repair any unsightly seams. Source: HomeGuides.SFGate

Bubbling

It’s a common situation for homeowners to have their carpet cleaned only for it to dry and bubbles to emerge. While they might think the cleaning was to blame, this is far more often the result of carpet that was not properly stretched before it was installed. This problem can easily be averted by pulling and stretching the carpet over carpet tacks. Source: TheSpruce

We have been in the business for over 20 years so you can rest assured knowing that your carpeting is in safe hands. Contact us today!

The post Signs of a Bad Carpet Installation appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/36iSkPT

3 Important Chimney Safety Tips You Should Keep in Mind

Imagine this: you’re trying to stay warm by hanging in front of the crackling fire with a cup of your favorite drink, hand-knitted blanket wrapped around you. All of a sudden, fire broke! Way to ruin the moment, right? Prioritize safety and have peace of mind by following these tips:

Avoid creosote buildup
Creosote is a chemical mass of carbon formed when wood, tar or fossil fuels are burned. Creosote can linger in chimneys and you would have no idea from the outside. When creosote is not removed, can become a thick coating of debris in the flue and chimney. Most chimney fires start in the smoke chamber/smoke shelf area so it’s important to clean those areas. Creosote ignites at 451 degrees Fahrenheit and once it starts burning, it expands like foam sealant and can build to more than 2,000 degrees Fahrenheit in less than a minute. Source: FamilyHandyman

Don’t remove ashes right away
Fireplace coals can remain hot enough to start a fire for up to three days, so always wait at least that long before removing the ashes. At that point, close the damper to prevent cold air in the flue from stirring up excess dust while you’re removing the ashes. Be sure to wear a dust mask and open a window in the same room as the fireplace to prevent negative air pressure. Use a shovel to scoop the ashes into a metal container. Store the container far from combustible materials and surfaces and wood floors. Source: HGTV

Install a safety screen
Keep a fireplace screen in front of the fireplace when in use. A fireplace screen should be at least 3 feet (0.91 m) high, and most common models are be made of fine, crossed wire on a flexible, three-part frame. This screen will catch any live sparks that leap out of the fire, and will also prevent larger logs from falling out.[6]

A screen is a necessity if you have small children or animals in the house, as they could easily run or stumble into an open fire. If there are more durable models of fireplace grate available at your local hardware store, it may be wise to purchase a heavy grate in addition to (or instead of) a lighter screen. Source: WikiHow

Let us take a look at your home’s chimney to see whether there are damages that need repair. Book an appointment today!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/2Yv0VMS

Wednesday, December 4, 2019

4 Tips to Prepare Your Home for Winter

Don’t let the cold winter air bother you. Protect your home from the chill by taking note of these simple tips:

4 Tips to Prepare Your Home for Winter

Install carpet

No one wants to be stepping onto a cold floor and they jump out of bed in winter! If you’ve been thinking of carpeting your home, or even just the bedrooms, now is the time! Your toes will thank you for it. Source: HomesToLove

Have an energy audit

If you’ve never had one, a professional energy audit is a good investment. But fall is also a good time just to check your door seals. Make sure you’re not seeing daylight around your exterior doors, and take a can of spray foam insulation and fill in around those drafty outlets and light switches. Source: WashingtonPost

Change furnace filters

Dirty furnace filters reduce furnace efficiency and push up heating bills. They also shorten the life of a furnace.

Check and replace the furnace filter monthly in winter or every three months while the system is in operation. Your owner’s manual will tell you where it’s located. Hold the filter up to the light: If you can’t see light through it, you need a new one.

Pleated filters work best because they trap more dirt particles. Source: MoneyTalksNews

Inspect the chimney draft

Make sure the chimney will draw up the fire and smoke properly. Test this by taking several sheets of newspaper and rolling them up. Then with the fireplace damper in the open position, light the newspaper in the fireplace. The smoke should rise up the chimney. If it doesn’t, you have an obstruction and need to call a professional in to clean the chimney of creosote and ash and possible debris. Source: TheSpruce

No other type of flooring is as comfortable as carpet on a winter night. Call us today to book your appointment!

The post 4 Tips to Prepare Your Home for Winter appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/2rUA3te

Tuesday, December 3, 2019

Pros and Cons of Copper Gutters

Gutters are a vital part of the house. They keep water away from your house’s roof, siding, and even basement, thus avoiding structural damage and flooding. There are many different types of material you can choose from, but today, we’ll be focusing on copper. Weigh its pros and cons below:

PROS
Longer life-span
Copper is more durable than many other materials. Most copper gutters last 100 years or more. After a while, the metal produces a greenish layer called verdigris, which is often used as an industrial fungicide that helps the gutter last longer since roots won’t set in to cause damage. Verdigris is what gives the Statue of Liberty its distinctive color.

Visual appeal
Copper has a reputation as a beautiful material that lends charm and elegance to any structure. It fits especially well on older buildings, matching the materials and styles used. It also helps a home stand out among others in the neighborhood, adding curb appeal.

Structurally sound
Because of copper’s durability, items manufactured with copper are structurally sound. For example, most rain gutters require joints so that when the material expands and contracts in fluctuating temperatures, no cracks form. Copper, however, doesn’t require these joints. The whole gutter can be installed as one piece, which makes it stronger. Source: Nearsay

CONS
Expensive
The single biggest con of choosing copper gutters for any house is the price. With prices reaching nearly $25 per linear foot for just the gutters alone, it is easy to see why copper gutters have not taken off in popularity yet. Source: Improvenet

Difficult to install
It’s inadvisable to install the copper guttering yourself. Why? Because cuts or adjustments to joints may be necessary in order to complete the process. And you might not have specialist tools or expertise to get the job done properly. Source: Medium

Want to install copper gutter on your home? We’ll be more than happy to help. Call us for a free estimate!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/2YcGq7z

Thursday, November 28, 2019

Characteristics of Polyester Carpet

Are you thinking about giving your home a carpet makeover for Christmas? Consider choosing polyester carpet fibers. Here are some of its best characteristics:

Characteristics of Polyester Carpet

Eco-friendly

Many polyester carpets, called PET (polyethylene terephthalate) contain content made of recycled plastics such as water bottles. This can make polyester a “green” option, and also helps strengthen the fiber to help it last longer. Polyester is also naturally stain-resistant and easily recyclable. Source: HouseTipster

Durable

One noted weakness of polyester is that it is not as durable as nylon carpet fiber. Historically, polyester couldn’t come close to the strength of nylon and thus was recommended for lower-traffic areas of the home.

Today due to many technological advancements, the gap between polyester and nylon has been drastically reduced. Manufacturers have been working to improve the performance of polyester, and now polyester is stronger and more durable than ever before. Manufacturers are confident in the longevity of the new polyester, demonstrated by the longer warranties the higher-end polyesters now carry.

Whether its durability can match that of nylon, at this point, only time will tell. With this new generation of polyesters on the market, it will be a few years before we can fully compare their performance against both nylons and polyesters of the past.

Affordable

Relative to nylon, polyester carries a lower cost, due to the lower cost of raw materials and production. Thus, it is a great option for budget-driven renovations, and it offers good value for the money. Polyester carpets are available at almost every price point and quality, offering a vast selection of styles. Source: TheSpruce

Stain-resistant

Polyester is fairly easy to clean. Like olefin, it resists almost all water-based stains but is susceptible to oil stains. Once oil gets into the fibers, it’s difficult to remove. Polyester fiber carpets can shed individual fibers. They may also be susceptible to pilling, in which loose fibers become entangled with each other and form little particles on the surface. Source: Home.HowStuffWorks

Not sure whether polyester is the best option for you? We can help identify the best type of carpet to use for your budget and needs. Call us today!

The post Characteristics of Polyester Carpet appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/37MdqYD

Wednesday, November 27, 2019

How to Repair Damaged Window Screen

Even the sturdiest window screen may eventually get damaged due to extreme temperature and daily wear-and-tear. To avoid further damage, make sure you repair it right away using these tips:

Patching a hole on the screen
To patch metal screening, cut a square or rectangle about 1 inch bigger all around than hole. Pull out the wires on all four sides to make a wire fringe about 1/2 inch deep around the patch. Bend the fringe wires down sharply at a right angle; use a wood block to make a clean bend on each side of the patch. When the fringe wires are evenly bent, set the patch over the hole in the screen, and press to insert the bent fringe wires through the screening around the hole. The patch should be flat against the screen, covering the hole completely. Fold fringe wires down flat toward the patch’s center on the other side of the screen. Then stitch around the entire patch with a needle and nylon thread or with fine wire. Source: Home.HowStuffWorks

Replacing the whole screen
For especially large holes and damaged screens, you don’t want to mess around with trying to put patches on. Just replace the whole screen, assuming the frame is in good shape. Start by measuring the frame carefully so you know which width of screen material you should buy, and take note of the material used to make the frame. If it’s metal, you’ll need to buy a screen in a matching metal to prevent reactions, or consider using nylon. Wooden frames will take any kind of screen, but metal screens can stain. Source: Networx

Re-attach the molding
Nail the molding back into place with small nails or brads, and countersink. Trim excess screening with a utility knife. Fill nail holes with paintable wood filler, and paint. Source: MarthaStewart

Let us help you deal with home repairs so you don’t have to spend as much time and effort doing it on your own! Call us today to book an appointment!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/2OPR67Q

Thursday, November 21, 2019

3 Ways to Prepare Your Home for the Holidays

Pretty sure that by now you’ve heard Mariah’s hit song, “All I Want for Christmas is You” playing multiple times. This means that the holiday season is here, and parties will be more frequent from now on. Make sure your home is ready by doing the following tips:

3 Ways to Prepare Your Home for the Holidays

Prioritize the safety of children and pets

Holiday decorations can pose risks to children and pets. Both tend to be attracted to the delicate ornaments hanging on the bottom branches of Christmas trees, for instance, as well as to sparkling tinsel and ribbons that can be choking hazards. Cats may feel tempted to try to climb your tree, and your dog’s wagging tail can easily wreak havoc, too.

To keep your tree safe for pets and small children, stay away from tinsel, and put only shatterproof ornaments within reach of little hands and paws. Keep in mind that some traditional holiday plants can be toxic, including holly (particularly holly berries) and mistletoe, so make sure those are kept out of reach, too. And when it comes to lighting holiday candles, never leave those open flames unattended. Source: MentalFloss

Add a makeshift storage space with a single bar

When you need temporary clothes-hanging space around the house, keep an extra shower tension bar handy. Put it between the jambs in the laundry room door on heavy laundry days. Or, use it in the bedroom closet to pack for trips or stick it in the closet opening in the guest room/den so overnight guests can hang up their clothes. It’s a quick and easy way to gain an extra closet!  Source: FamilyHandyman

Prevent spills before they occur

Limit options but not the fun. Skip serving lots of sticky mixers and dark-colored wines or liquors, which can create tough-to-clean stains. Serve white wine, a sparkling option like Prosecco, beer, and a fun signature drink that you can premix. If you’re set on a festive punch, place the bowl in a non-carpeted space away from high-traffic areas. Source: GoodHousekeeping

Do you think your carpet does not look ready to welcome guests? We can clean your carpet and repair all kinds of damages to make it look new. Call us to book an appointment before slots run out!

The post 3 Ways to Prepare Your Home for the Holidays appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/2D1JJ7F

Tuesday, November 19, 2019

3 Ways to Protect Your Home from Extreme Weather

Fall is almost over, and the cold season will soon kick in! Why not prepare your home for the extreme temperatures as early as now? Here are three things you can do to keep your home safe and damage-free these upcoming months:

Clear the gutters
Fall can be one of the most pleasant weather seasons, but that doesn’t mean you can rest on your leaf piles. You know to rake your lawn, but you also have to clear your gutters of them. This’ll help keep water from freezing inside and splitting them when temps dip below freezing. Adding mesh or leaf guards can also solve the problem. While you’re up there, make sure your gutters are pitched at the right angle—between 1/16 and ⅛ inch per foot—to direct water to the downspout, and away from your home’s roof or foundation. Source: MentalFloss

Have an easy access to your main water shut off
If a bunch of junk is blocking easy access to your main water shut valve off, rearrange your basement or garage so that it will be easily accessible in the event of a plumbing emergency. Then, make sure your shut off valve is in good working order. Cranking it all the way to the right should shut off all water to the house. If it’s rusted open or only closes partially, replace the valve immediately.

Go a step further, and make sure everyone in your house knows where the shut off valve is located and how to use it to turn off the water. Source: TheSpruce

Keep the attic well-ventilated
In addition to clogged gutters, a warm attic can contribute to ice dam damage by causing snow to melt in the middle of your roof and drain toward the gutters where it may refreeze. To keep your attic sufficiently cool, make sure it’s properly ventilated and seal any cracks or holes in your ceiling and around fixtures so that household heat doesn’t seep into the attic. It’s also a good idea to insulate the attic floor to keep heat inside your home and outside of the attic. Source: AHS

Let us check your roof and gutters before the snow starts falling. Call us!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/2OtDeQs

Thursday, November 14, 2019

3 Tips to Make Your Carpet Look New Again

When your flooring starts to look dull, you don’t have to spend lots of money to liven it up. Following these simple tips will surely take away years of wear and tear:

3 Tips to Make Your Carpet Look New Again

Get rid of stains using shaving foam

First, your carpet probably needs a spot-clean. An easy, low-cost solution to get rid of carpet stains is shaving cream. Spray the stain with some foam shaving cream (not the gel kind) and let it sit for 30 minutes. 

Then, blot it with a clean cloth. This solution works on a wide range of stain types, including grease. Before you tackle the stain, do a test patch in an inconspicuous area of your carpet to ensure it won’t cause any discoloration.  Source: CNet

Brighten your carpet using salt

Combine equal parts HOT WATER and equal parts SALT, and apply to your rug with a damp cloth. Although you don’t need an ocean of the mixture applied (it will leave salt deposits that you’ll need to re-rinse out later), you’ll want to use enough that it will transfer from the rag or sponge to your rug. Give this trick a spot test to ensure that your particular rug can take the hot water, though most all rugs are able to hold up to this type of method. If you’re worried, try using a dry towel placed over the areas to help blot any excess moisture back up. Source: ApartmentTherapy

Colour it new

Mix dye according to package instructions. Pre-mixed dye is ready to go, but powdered dye needs to be mixed with water. Use the mixing instructions on the package as a guide, but realize the advantage of powdered dye is your ability to use more or less, depending on the intensity of color you’re looking for.

Apply dye to your carpet or rug. Take your time and apply the dye slowly and evenly over the carpet or rug. Try to avoid going over any area more than once or you’ll have some spots that are darker than others. Source: WikiHow

If the pieces of advice above aren’t enough, then call us! We can give vitality to your dead-looking carpet.

The post 3 Tips to Make Your Carpet Look New Again appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/2Ocva6p

Wednesday, November 13, 2019

Prepare Your Home for Fall Using These Tips

Can you smell the pumpkin spice in the air? Autumn is here, and we’re all for it! Before you start redecorating your home, tackle the following important tasks first so you can spend the rest of the cold season snuggled on your sofa while drinking a hot cup of your favourite drink.

Clear the chimney
Chimneys are an especially important cleaning task to check off your to-do list, as a dirty chimney is a potential fire hazard. Schedule a professional chimney sweep to clear out any debris, rodents or built-up creosote. Source: SheKnows

Examine the heating system
Do a survey of your home’s heating vents to make sure they’re not blocked or covered by furniture, carpeting, or curtains. Dust vents and clean all filters. Make an appointment for an annual heating system check-up. Source: RD

Inspect the gutters
No one loves this job, but we all need to do it annually. A few hours of work can prevent big problems later on.

While you’re up on that ladder, visually inspect your roof for damaged shingles, flashing or vents. Source: Zillow

Switch to heavier curtains
New curtains don’t just give your room an instant update; they can also help keep your home warmer during the cooler months! Just be sure to keep them open on sunny days. Source: PopSugar

Add exterior lights
Fall and winter means less daylight. So if you don’t have lights outside of your home and driveway yet, installing some is a great way to keep your home just a little safer. Lights around the perimter of your driveway can mean fewer accidents. And lights along your pathway can mean fewer falls. Also, because outdoor lights are typically left on for long periods of time, buying LED and energy saver bulbs will, as you may have inferred, save energy.  Source: Weather

Keep outdoor faucets inside
The faucets you use outside in the summer to wash your car, soak your garden and hose down your kids are susceptible to freezing. If proper care is not taken to shut-off and drain these lines before winter, it can lead to pipes and faucets bursting or cracking and can create a huge, potentially expensive, disaster. Source: GlobalNews

Don’t have the right tools to safely check your chimney, roof, and gutters? We’ve got you covered! Call us today to get a free estimate!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/2QhMz01

Thursday, November 7, 2019

3 Ways to Clean Carpet without a Vacuum Cleaner

Having carpet at home doesn’t necessarily mean that you also need to have a vacuum cleaner. It could definitely make things easier if you have one, but if you want to skip it or buy one later, then you can do the following for the mean time:

3 Ways to Clean Carpet without a Vacuum Cleaner

 

Use a carpet sweeper

Sweepers are relatively affordable tools that you simply run across your carpet to help pick up dirt. They do not require electricity and are much quieter than a vacuum, so you can clean anytime and anywhere. Run a sweeper across your carpets for quick crumb removal or dirty shoe trails.

  • Carpet sweepers have brushes that may need to be replaced periodically when they become filthy or too run down.
  • Carpet sweepers cannot handle the dirt capacity of a whole house, so if you’re cleaning each room you may need to clean out the bristles as you go.
  • Empty out the sweeper regularly so you don’t spread dirt around your house instead of cleaning it. Source: WikiHow

Get an old-fashioned broom

If you have a whole carpet to clean, the best way to clean a carpet without a machine is with an old-fashioned broom. It’s important to use one with stiff, natural bristles – a soft synthetic broom just won’t cut it this time.

Whatever comes out of your carpet whilst you’re doing this you’ll need to pick it up. Make sure you have a dustpan at the ready and maybe some rubber gloves for anything that’s difficult to sweep up. Source: Cleanipedia

Deep clean with vinegar

To start, fill the bucket with warm water and ¼ cup white vinegar. Take the scrub brush and dip it into the bucket. Start to scrub the carpet with the cleaning solution. You want enough of the mixture on the scrub brush to get the carpet a little wet, but not saturated.

Once you’ve scrubbed the carpet, empty the bucket and fill it with fresh water. Dip a rag, or terry cloth towel, into the bucket. Ring it out and start to scrub the carpet again. After you’ve made a second pass over the carpet, let it dry thoroughly. To help speed the drying process along, you can turn on a floor fan. Source: TipsBulletin

Nothing beats professional cleaning once in a while to ensure that you get rid of deep-seated dirt in your carpet. Call us to book an appointment, today!

The post 3 Ways to Clean Carpet without a Vacuum Cleaner appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/2qAN8Yk

Wednesday, November 6, 2019

3 Types of Skylights

Installing skylights is a stylish and efficient way to let natural light into your home. There are different styles you can choose from depending on where you plan to put it. Here are your options:

Fixed
Fixed skylights, as the name implies, are ones that do not open. Generally rectangular or square, they are glazed with flat or gently curved panes of tempered glass, or with acrylic or polycarbonate plastic in flat, bubble-shaped, or other molded profiles. Plastic skylights are usually more economical than glass ones and put less weight on your roof, but plastic can scratch and dull over time, and plastic-glazed skylights afford fewer options with regard to energy efficiency and UV (ultraviolet) protection.

Glass skylights come equipped, at a minimum, with tempered glass in a double layer with an air space between them. Better glass skylights will include a low-E (low-emissivity) coating that modifies heat gain and provides protection from ultraviolet rays for furniture and floors. The best glass skylights are filled with argon gas between the panes to improve their insulating ability—their R-value—even more. Source: Hunker

Tubular
Tubular skylights are the newest types of skylight on the market. Also called “light tubes” or “sun pipes,” they are diminutive, domed skylights paired with a reflective metal tube; the combination can make a dramatic difference in the level of light. Typically installed in small rooms, hallways and closets, they are normally 10″, 14″, or 21” in diameter. Tubular skylights often come with special features such as a dimmer switch to control the amount of daylight that is admitted or an integrated ventilation fan. Source: Networx

Ventilating
A ventilating skylight may be opened to allow air to pass through. These skylights are ideal for bathrooms and kitchens, where they help to relieve excess moisture and keep the flow of air steady. Ventilating skylights may be controlled by a remote, by a hand crank, or by an automatic sensor which tracks inside temperature. Source: WiseGeek

We can help you install a skylight that suits your budget and needs. Call us today!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114



from Kerrisdale RD https://ift.tt/33mSiWk

Wednesday, October 30, 2019

3 Useful Tips When Moving Furniture Across Carpeted Floor

Moving to a new home, or simply redesigning your existing place means that you’ll probably have to move furniture around, until you’re satisfied with how everything looks. Follow the tips below to avoid causing damage to your back during the process:

 

Remove everything inside the furniture

Most of us forget to do this and try to move everything when it’s all loaded up. Take the time to empty your furniture out. Not only will it make it lighter, it’ll prevent something from falling out accidentally and creating a big mess. Source: ApartmentTherapy

Use a shoulder dolly to lift 

A shoulder dolly uses your legs and shoulders to lift items. The load feels lighter since it frees your hands. Bending over isn’t necessary, allowing for proper upright posture. This equipment includes straps and harnesses for 2 people, so make sure you have a partner. It’s one-size-fits-all and adjustable to different heights. 

  • A shoulder dolly can lift up to 1000 pounds. It moves furniture seamlessly across carpet and other surfaces.
  • Fit the webbing through the buckles, and attach it together. Place the webbing directly under the furniture, and carefully lift to move it to your desired location. Use your hands to stabilize the furniture so it doesn’t fall over. Source: WikiHow

Buy sliders or gliders

After wrapping up your furnishings in moving blankets, use sliders to move the furniture. These sliders (or gliders as they’re sometimes called) can easily be found online (tip: check Amazon). Sliders are special pads made of either plastic, rubber or felt that fit underneath furniture legs. Once placed underneath the furniture, you’ll be able to easily glide the item across the floor without scratching up your hardwood. Furniture sliders are perfect for couches, dressers, tables and heavy appliances. Source: Moving

We can help you replace dingy-looking carpet left by the previous homeowner, or we can also make your current carpet look new again. Call us today!

The post 3 Useful Tips When Moving Furniture Across Carpeted Floor appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/2q9JP9Z

Tuesday, October 29, 2019

3 Types of Stairs You’d Love in Your Home

Choosing a design for your staircase doesn’t only depend on how you want it to look. There are other factors, such as the available space, safety, and budget to consider. Take a look at the different options you have below:

Straight
A straight staircase is the most common and affordable style available. Pre-cut risers — the vertical part of the staircase — are available in lumber yards home stores and many builders use these because of their simplicity. The straight line design means that the staircase doesn’t need any special support and only needs to be attached at the top and the bottom. This type of staircase also allows for easier installation of railings and handrails.  Of course, there are variations of the straight staircase that include open risers, modern materials and metal cable railings that significantly alter the basic look. Source: Homedit

Spiral
The spiral staircase is certainly the most interesting design. It has a helical arc, resembling the shape of a spring. All of the treads are wedge-shaped, but as opposed to the winder and arched staircases, these treads are all consistent in size. There is a central vertical post around which the treads radiate.

Spiral stairs are found mostly in city loft apartments, due to its economical use of space, ease of installation, and limitations of capacity. A spiral staircase is not really suited to frequent use, as it has a confined area which is difficult to move upon. Only one person can navigate the stairs at any one time, and it is difficult to carry large items up or down on it. This is also why many building codes do not allow the use of spiral stairs as primary ingress to a full-sized second floor. Source: Homify

Bifurcated
The grandest of them all—this is the style of the iconic Titanic staircase—bifurcated stairs include one sweeping set of steps that splits off into two smaller flights going in opposite directions. Source: ArchitecturalDigest

It would be an honor to be a part of building your dream home. We have been in the business for over 55 years so rest assured that we can bring your imagination to life. Call us!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114



from Kerrisdale RD https://ift.tt/2Nldzsx

Tuesday, October 22, 2019

5 Vacuum Cleaner Maintenance Tips

Keeping your carpet clean requires a good deal of regular vacuuming. However, if the vacuum itself isn’t clean, you may just be spreading dust around instead of collecting it. Here are some tips you should follow:5 Vacuum Cleaner Maintenance Tips

Take care of the cord

Avoid pulling out the plug with the cord or using the automatic rewind when the cord is tangled or obstructed.

Switch the bag before it gets full

Remember a bag shouldn’t be full to the brim before it is changed, as vacuum cleaners can lose suction when bags are more than half full.  Source: Cleanipedia

Check the filter

If your vacuum uses a replaceable paper filter, check it every week when you check the bag. Many filters can be rinsed clean, dried, and reused. A filter that is torn or very dirty should be replaced. A blocked filter will also prevent the free flow of air through the vacuum. Never use the vacuum without the filter. For HEPA filters, follow the manufacturer’s instructions. Source: MarthaStewart

Find the right settings and accessories

Most vacuum cleaners have height settings for different surfaces. Having a vacuum set too low when in use on a carpet can lead to extra pressure on the motor and brush roller. You should also make use of the correct accessories for special circumstances. For example, don’t use the carpet cleaning head for a wooden floor.

Remove accumulated dirt

Some parts of a vacuum cleaner accumulate dirt. Areas around the brush roller can get caked with dirt which should be cleaned off regularly. The brush roller should be cleaned frequently. It is particularly important to remove any fibers that have been wound around the roller bearings. Source: DoItYourself

We can help you deal with all types of carpet-related problems. Stains, cuts, burns – we can repair any damage and make it look like new again. Give us a call!

The post 5 Vacuum Cleaner Maintenance Tips appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair https://ift.tt/35Th7KZ

3 Areas Every Home Buyer Should Inspect

All houses are taken care of differently. Some are well-maintained, while others are not. Don’t make the mistake of buying a house with hidden damages waiting to surprise you. Make sure you do the following tips:

Check the attic
A well-functioning attic is crucial to protecting a home. If your home inspector can get into the attic without trampling insulation, you can often learn a lot about the home and any renovations or repairs. One very common inspection red flag is improper venting of bathroom fans into the attic (and not extending the vent all the way through the roof). If your bathroom fan is venting directly into the attic, all it’s doing is sending moisture and humid air into the attic where it cause mold, rot or worse. It’s also not up to code. If possible, have your inspector check for attic air leaks. While you can fix these attic air leaks, an attic with air leaks could have potential issues with insulation, moisture, mold or worse. Source: FamilyHandyman

Find out if there are proper drainages
“The biggest issue of any home is always going to be water disbursement,” Turner says. “There’s the potential for damage to the foundation. If water is found to be in the vicinity of the house, you want the water to flow away from the house, not towards it.” Source: Curbed

Take a close look at the roof
When your home inspector is checking out the roof, ask them about the condition of the shingles. Are there any that are buckling or missing? How about the eavestrough? Is there an accumulation of asphalt granules in the gutters? Are there signs of major wear and tear? If so, the home may be in need of a roof replacement.

A roof replacement isn’t cheap, so you can always ask that the sellers take care of replacing the roof, or you can ask for a price reduction to compensate. Source: HGTV

If you still want to buy the house despite damages in some areas, then consider renegotiating the price so you can have a budget for renovation. We can repair your home, and make it safe before you move in. Contact us!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114



from Kerrisdale RD https://ift.tt/2MyET7r

Friday, October 18, 2019

5 Roofing Mistakes To Avoid

Before you have your roof installed or repaired, learn about the most common mistakes that might occur so you can avoid them:

Incorrect installation
Every roofing manufacturer has specific regulations on how their roofs must be installed. Items, such as number of nails per shingle, can determine whether a manufacturer will stand behind their warranty should the roof fail earlier than the guaranteed lifespan.

Failing to get an attic
A roof is an entire system, comprised of many components. Proper attic ventilation is necessary. Without it, your shingles can wear out sooner than they should, your insulation can be ruined and your energy costs can skyrocket.

Not getting a roofing permit
In most cases, a permit is needed to install a new roof. The homeowner is the one held liable for failure to obtain a permit. Ramifications can include fines, forced removal of the new roof, or your insurance company refusing to insure the roof. Source: AngiesList

Buying cheap materials
As rational human beings, we will most probably go for the most affordable materials. The paradox of this belief is that cheap might be expensive because low-quality materials get damaged faster. To achieve the best roof repair, go for high-quality materials that will serve you for long. Your house will also look more presentable when you purchase the right products. You can do an online search or ask for recommendations from friends and relatives to know what material will work best for you. Source: FineHomesAndLiving

No leak barrier
The installation of the leak barrier is necessary since it provides extra protection in vulnerable areas or places with perforations due to nails or fasteners. The parts of the roof in which we recommend the installation of leak barriers are valleys, vertical walls, accessories, eaves, chimneys, and skylights, but it could vary depending on the region of the country in which you live. Source: GAF

We’ve been taking care of roofs in the Vancouver lower mainland area for more than 55 years. You can rest assure that your roof installation will be seamless with us. Call us to book an appointment!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114



from Kerrisdale RD https://ift.tt/2pAKGAg

Tuesday, October 15, 2019

3 Things to Know before Replacing Your Home’s Roof

Roofing is an expensive investment. And if it gets damaged, it’s important to keep the following in mind so you don’t spend more than you need to. Make sure you cover the following tips before starting your project:

Mind the paperwork
For such a quick job—two to five days, depending on the size and style of the roof—roofing involves a tremendous amount of liability and money. Three documents are essential: 1) Most towns require a building permit for a roofing project; this can help to ensure that your contractor follows building code. Plus, your roof warranty is likely void if you don’t get the permit. 2) A written contract that specifies all of the agreed-to details, products, and costs of the project. 3) A letter addressed to you from the contractor’s insurance carrier confirming that the specific project is covered under the roofer’s worker’s compensation and liability plan. Source: Money

Weigh the pros and cons of choosing an overlay
An overlay involves installing new shingles on top of the existing ones. Because the old roofing stays put, overlays require fewer labor hours and cost less than replacement.

Approach overlays with caution, however, as they may void or shorten the manufacturer warranty on roofing materials. And overlays typically increase future replacement costs since multiple layers will need to be removed the next time around. Source: NerdWallet

Keep an eye on the trash
Replacing your roof is going to generate a lot of trash and litter. This trash may be spread across your home during the installation. For instance, if the old roof came down with thousands of nails and most of them landed on your driveway or grass, they can cause injury to you, your pets, and your family. Also, they can deflate vehicle tires. Fortunately, most roofers have a giant magnet on wheels that is passed over the yard to grab metallic items such as nails and dropped fasteners. However, some roofers forget to bring it on site. Before making the final payment, ensure the roofer comes with the magnet and gets rid of dropped nails. Also, they should take care of the trash. Some roofers have dump trucks, making the process of trash management easy. Source: FineHomesAndLiving

Get your roof replaced by a roofing company who has a proven track record of quality work for more than 50 years. Call us for a free estimate!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114



from Kerrisdale RD https://ift.tt/32ku0vA

Tuesday, October 1, 2019

Prepare For Bathroom Remodeling With This Handy Checklist

Content originally published and Shared from http://perfectbath.com

12640269_10153561415284811_3349737664275668475_oBefore you begin any remodeling project, it’s important to make sure that you have everything you will need to complete the work correctly, and in a timely manner. A bathroom renovation is a big project for homeowners to tackle, so preparation is the key to ensuring that it goes as smoothly as possible. Use this handy checklist with tips as a guide:

Set your budget. Your budget is arguably the most important aspect of any bathroom remodeling project. Determine your budget ahead of time, and then keep it at the top of the checklist. As you purchase items and pay for services, keep track of how much you’re spending. Many projects go over budget, but by setting a reasonable number at the start and pricing services and materials beforehand, you can try to keep costs under control.

Hiring professionals, or DIYDetermine which aspects of the renovation project will you tackling yourself, and which ones will you be hiring out to the pros:

  1. Demo
  2. Layout/floor plan design
  3. Flooring installation
  4. Tile work
  5. Fixture installation
  6. Plumbing
  7. Electrical

If you are going to hire professionals, you’ll want to contact several to get information and cost estimates. Choose a contractor that has a good reputation and recommendations from satisfied clients. They should be able to give you an estimate for the work to be done, as well as a time line for when the work will be completed.

Select your materials. Choosing the materials that you will use may be one of the most difficult and time consuming aspects of a remodel. Determine what items you want to replace and purchase, such as:

  1. Vanity
  2. Flooring
  3. Tiles
  4. Fixtures
  5. Faucet and shower head
  6. Paint color
  7. Countertop
  8. Shelving
  9. Sink

If you aren’t sure about the design, you may consider working with a professional designer who can help to guide you through the process. There are many details to consider, and you want to be sure that you get everything that you want.

Finally, before any work can begin, you need to make sure that you have any necessary work permits. Check with your local building authority to see what you may need. Once you have your permits, have found a contractor, and have settled on the design, you’re ready to get the bathroom remodeling project underway.

The post Prepare For Bathroom Remodeling With This Handy Checklist appeared first on Perfect Bath Canada.



from Perfect Bath Canada https://ift.tt/2p6oMF0

Untitled

Content originally published and Shared from http://perfectbath.com

The post Untitled appeared first on Perfect Bath Canada.



from Perfect Bath Canada https://ift.tt/2nCTOUm

4 Tips to Make Your Outdoor Space Look Luxurious

Content originally published and Shared from http://perfectbath.com

The post 4 Tips to Make Your Outdoor Space Look Luxurious appeared first on Perfect Bath Canada.



from Perfect Bath Canada https://ift.tt/2okuK4Q

How to Choose the best bathtubs for Hydrotherapy

Content originally published and Shared from http://perfectbath.com

NOTE TO SELF… this ARTICLE NEEDS TO BE SPUN AND Parts rewritten before publishing and rechecked for originality.

How to Choose the Best Hydrotherapy Tub

If you want the ultimate spa experience for your new bathroom, chances are you’re looking at tubs that provide hydrotherapy.  The use of hydrotherapy has been around for centuries, providing therapeutic solutions for people with arthritis, muscle aches, partial paralysis, and more. Those massaging jet streams you enjoy when you soak in a Jacuzzi or hot tub don’t have to be a once-in-a-life time luxury. Instead, they can be a permanent part of your bathroom that you enjoy on a daily or weekly basis. But out of the numerous tub options that are available today, how do you decide which one is right for you? It all depends on your specific needs and what works best with the design of your bathroom.

Air Tubs
Air tubs have several unique features, but the primary difference between them and other hydrotherapy tubs is that they work by releasing thousands of tiny, relaxing air bubbles throughout the tub. These stimulate your muscles and help reduce the pain associated with things like arthritis and excessive exercise. Another feature of air tubs is that they envelope the body in champagne-like fizz that gently caresses the skin. These tubs also stimulate and invigorate touch receptors to mildly release tension associated with tension and stress. These bubbles also appeal to multiple senses, including a blend of aromatherapy bath oils. Air tubs optimize your bathing experience by implementing a tub cleaning system that makes your life easier over time by taking off some of the pressure of frequently cleaning and maintaining your tub over time. Not only will the experience feel delightful, but it will be a constant source of physical therapy whenever you feel the need for it.

whirlpool bathtub with glass sides

Whirlpool Tubs
Whirlpool tubs are just what they sound like: tubs that move water strategically to create increased pressure that circulates. Whirlpool tubs also normally feature air jets that can be used for massage purposes in addition to the way they help circulate the water in the tub. Whirlpool tubs soothe muscles instantly through a stronger deep tissue massage. If you are experiencing severe muscle soreness or simply want the ultimate massage experience, a whirlpool tub might be the best option for your new bathroom. Whirlpool tubs often create a customized bathing experience with adjustable jets to fit your body and hit the places of soreness. Whirlpool tubs often maintain a comfortable bath water temperature when used with an inline heater. This can prevent the water from becoming scalding hot, as well as keep the temperature at an event state so that you do not have to leave more quickly due to the plummeting water temperature.

best hydotherapy bathtubs

Total Massage Tubs
Perhaps one of the best options for the ultimate spa experience is the total massage tub. With a total massage tub, you will enjoy luxury and sophistication every time you walk into your bathroom. Total massage tubs blend the technology of air tubs and whirlpool tubs to create a symphony of fizzy bubbles and pressurized water. Total massage tubs provide ultimate relaxation through the combined sensations of soft effervescence and targeted massage. Like the whirlpool tub, the total massage tub ensures optimal water temperature through the duration of your bath with an inline water heater. You can also enjoy a more advanced experience by incorporating any combination of aromatherapy oils into your bath. As the relaxing and detoxifying scents move into the air, you might even transcend reality for a few moments, enjoying the ecstasy of the moment. Total massage tubs also offer in-built tub cleaning systems that take the worry out of total massage tubs. Without the stress of maintaining your luxurious tub, you’ll be able to enjoy its features without hassle.

hydro massage bathtub

A Word on Design
Most suppliers will feature tubs of various shapes and sizes within the different tub categories so that you can be sure to enjoy the tub you want without sacrificing the design. However, it’s important to think how your tub will fit into your overall design plan before you begin construction. If possible, already have the specific tub in mind, along with its measurements and constraints so that you can perform your remodeling according to the tub of your dreams.

Whirlpool Bathtub for Two People - AM156
Corner Bathtub

This is simply an overview of the different hydrotherapy tub features and we hope we’ve given you some points to consider when determining which one is right for your home. Do your own research and don’t be afraid to ask questions before making that final purchase.

Do you already enjoy the features of a hydrotherapy tub in your home? Which attributes were instrumental in helping you come to a decision? Leave your feedback in the comments below and let us know if there’s anything you like to consider that’s not included above!

The post How to Choose the best bathtubs for Hydrotherapy appeared first on Perfect Bath Canada.



from Perfect Bath Canada https://ift.tt/2oZd9PY

Far Infrared Technology

Content originally published and Shared from http://perfectbath.com

Far Infrared Demonstration

Far Infrared

Infrared saunas are different from traditional saunas because they operate at a temperature of 90-145 F compared to a traditional sauna that operates at 185-230 F. This temperature allows you to be able to breathe comfortably and enjoy the benefits for extended periods of time. Because the infrared rays safely and comfortably penetrate the skin up to 2″ deep, even your organs and deep tissues are stimulated. This produces sweating 2-3 times as much as a traditional sauna. Infrared saunas use 20% of the infrared energy.

What are Far infrared rays?

Far infra-red rays are also known as FIR are absolutely safe and beneficial to the human body. They are so safe that even doctors use them in hospitals to warm newborn babies. FIR are naturally occurring and are the benign portion of sunlight that we can receive. To perfectly understand FIR, picture yourself sunbathing outside on a warm day and a cloud is overhead. As soon as the cloud moves on and the rays are now directly on your body you start to feel warmer. From the sun, your body is being heated by FIR.

Another good example would be placing a thermometer in the sun and one in the shade. The thermometer in the sun is warmed by FIR and will read higher, but the outside air temperature is still the same. Infrared heaters in the sauna work the same way as natural sunlight but without the damaging side effects of solar radiation.

Sunlight is the source of life on earth. Sadly, not all of the energy is beneficial. Sunlight is an element of a wide spectrum of frequencies, including ultraviolet and infrared rays. Visible sunlight is in the center of this spectrum. At a higher frequency are ultraviolet rays that are responsible for causing sunburn.

At a reduced frequency, however, are the gentle infrared rays. Infrared light is a result of heat production. Humans generate waves in the 6-20 micron range. The ideal output range of far infrared sauna emitters is between 5 and 14 microns which is very close to the resonant frequency of a water molecule. This coincidence makes sense since our bodies are almost 70% water. This range, appears to have great regenerative effects on the body.

Our heater’s output is uniformly spread around the 9.4 micron point of peak human output. As the water molecule resonates or vibrates, this vibration generates a release of cellular toxins such as aluminum, cholesterol, mercury and other toxic gases such as sulfur and formaldehyde. The energy output from the far infrared sauna corresponds so closely to the body’s radiant energy that our bodies absorb 96% of the energy.

 

Contact:
Perfect Bath
Phone: Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com

 

The post Far Infrared Technology appeared first on Perfect Bath Canada.



from Perfect Bath Canada https://ift.tt/2nyvUcE

Tuesday, September 17, 2019

4 Things You Should Remove From Your Bathroom

Content originally published and Shared from http://perfectbath.com

Keeping the bathroom clean should be a continuous effort.  If neglected, clutter will slowly pile up until the whole room starts to look messy. Start by removing the following:

Expired makeup
While it may look okay in the container, expired makeup can turn clumpy and also harbor bacteria which can cause an unfortunate reaction to your skin (think bumps or even infections). Toss and spring for some new products — your skin will thank you. Source: Today

Hotel toiletries
People are always tempted to stock up on the cute bottles of shampoo and conditioner when they stay at a hotel, but they aren’t necessary to keep and have take up space in your bathroom. It’s better to buy reusable bottles and fill them with your own body wash and lotions. Hale and Draddy suggest donating travel-sized toiletries from hotels to homeless shelters. Also, check with your local church or school because many times they collect them. “To help people let go of stuff it helps to know that it’s going to someone else. It’s a really good motivator,” said Draddy. Source: RD

Prescription antibiotics
First of all, get these out of your bathroom, says Shilpi Agarwal, MD, family medicine physician and author of The 10-Day Total Body Transformation.” Condensation can affect potency and make medication go bad quickly,” she explains. In or out of your bathroom, though, leftover prescription medications should always be thrown out by the expiration date. “Not only do you run the risk of not having a complete course, but also the medication may become ineffective,” says Dr. Agarwal. Taking expired medication can also cause you to develop antibiotic resistance, which will make it useless when you really need it. Source: Health

Toilet brush
It’s an item we’d all rather not think about, right? It’s a gross implement used to swipe away at an even grosser fixture. Well, chances are you’re not soaking your brush every month to kill extra bacteria and possible odors. And, since toilet brushes are fairly cheap, shoot for throwing yours away every year to avoid a case of the shudders next time you need to use it. Source: WiseBread

The bathroom is a place where you should be able to wash all your worries away. It should be a place where you can relax as you soak in a warm bath. However, if your bathroom fixtures are outdated, it may just stress you out instead. Check out our website to choose from a variety of high-quality, timeless pieces that will make your bathroom look straight out of a magazine!

 

Contact:
Perfect Bath
Phone: Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com

The post 4 Things You Should Remove From Your Bathroom appeared first on Perfect Bath Canada.



from Perfect Bath Canada https://ift.tt/31wNBZ4